Some times your network policy installations on Check Point devices might fail. For me it happened after updating a gateway cluster to the “latest and greatest R77” version. I was unable to push the policy and I was getting the “/opt/CPSFWR77CMP-R77/conf/policy-name.pf”, line 912700: ERROR: target <fw-name> is prohibited” error message.
In order to see what is actually causing the error you will need to log in to the management server via SSH. Go in to “expert mode” and look at what is on the line that the error message is pointing at.
So basically, to fix the issue in my case/work around, I did the following:
- Logged in to the security management server in expert mode
- Opened up the policy file from the place it was complaining about with the less command. (Hints on how to go to a specific line can be found stackoverflow topic here)
- In my case on that specific line I saw a list of DPD(dead peer detection for IPSec VPN) peers which hinted that I should try and disable DPD
- Logged in to the management server using smart dashboard, removed permanent tunnel ticks on VPN’s relating to the GW cluster with the issue and tried installing the policy.
- Policy successfully installed..
After that I reported the bug to Check Point support and they confirmed the issue..